Students projects 2018

Abrasive-holding plate

Abrasive-holding plate

MICHELE GASPARINI   michele.gasparini.2@studenti.unipd.it   Introduction the production of marble and granite slabs has always been an important business and the technologies to obtain stronger and better-looking slabs are in continuous development. Murble and Granite, during process of formation, need to … Continue reading

Automatic Clock

Automatic Clock

Nicola Visentin – nicola.visentin.6@studenti.unipd.it   Introduction The need to measure the passage of time with increasing accuracy has required the man to design and build more and more complex systems able to partition the time in constant intervals and as … Continue reading

Bin Lift System

Stefano Nasato – nasato.stefano@gmail.com   Introduction In this important historical period, focused on the environmental care and in the waste recycling process, engeneering of efficient mechanical systems assume an important role maintaining however an ecological conformation.  The object of this work is … Continue reading

Excavator

Excavator

Creation and validation of the model of an EC160E Volvo excavator, with the goal of obtaining the cylinder forces and stress on the components during different working operations. Continue reading

FSAE DRS

FSAE DRS

Leonardo Crivellaro – leonardo.crivellaro@studenti.unipd.it   Introduction The topic of the project is the Drag Reduce System (DRS) for the formula SAE car MG13.18 of the RaceUp Team of University of Padova.   Fig.1 : MG 13.18 In particular the rear … Continue reading

FSAE front suspension

FSAE front suspension

Michael Cattani – michael.cattani@raceup.it Introduction The topic of this project is the kinematic analysis of an independent suspension, taking into consideration the suspension system of the Formula SAE electric car of the University of Padua (RaceUP Team). The project started … Continue reading

FSAE rear suspension

FSAE rear suspension

Giovanni Schiavinotto – giovanni.schiavinotto@studenti.unipd.itl Introduction The topic of the project is the rear suspension system of the Formula SAE car MG-13.18 of the RaceUP Team of the University of Padua. Fig. 1: MG 13.18 In particular it is a double wishbone pull rod … Continue reading

Kite Flyer

Kite Flyer

Silvio Zuin – silviozuin1@gmail.com Introduction The purpose of this work is to simulate the Kite Flyer, a rotating amusement park ride. This ride is particular because it’s moved by two different rotational motors. The axis of the two motors are not parallel … Continue reading

Comments are closed.